Vaporesso pod systems are reliable, and it is understandable to experience some problems with them, as well as with any other pod. You mainly face problems with firing, leaking, or flavouring, but all could be easily solved by knowing how to troubleshoot common problems. In this article, let’s discover some of the common Vaporesso Pods problems that some users have come across and provide solutions to them. Most of them are simple to fix; all you need is some caution and occasional fixing, which will keep your vape running optimally.
Problems and Fixes of Vaporesso XROS, Vibe, and Luxe Series
1. Vape Activation Issue
It is something that happens quite often in pod systems, in particular, the XROS or the Vibe models of Vaporesso. It may also happen with new vapes; in most cases, it may be attributed to a connection problem or a problem with the draw-activation.
Fixes: Check the battery power, turn on the vape, and ensure there is no dust on it. And if it is still not coming into play, use another cable, clean the connectors or test another pod.
2. Unwanted Spitting and Gurgling
This happens when a coil floods, usually due to adverse weather conditions or carrying the gadget in congested places. It is among the common Vaporesso Pod problems.
Fixes: Blow gently through the bottom of the pod, flick it to remove excess liquid, and avoid hard draws. Consider higher VG e-liquid if using very high PG juice.
3. Weak taste or unpleasant vapour
Over time, pods may lose flavour and vapour production, in most instances because of a blockage in the coil or incorrect use of e-liquid.
Fixes: Replace the pod if it’s over 1-2 weeks old, alter the airflow, and make sure the vape has enough battery. In case the flavour is still weak, then experiment with a new e-liquid.
4. Leakage of Pod
Pod leakage happens when the user does not treat the pod system appropriately. The change of temperature, overfilling, or cracks in the pod will result in such an issue.
Fixes: Make sure the pod is always filled up with the nozzle touching the side, do not overfill and make sure the pod clicks in and is tight. Moreover, protect the vape from sharp objects as they can create cracks in the pod.
5. Burnt Puffs
A burnt hit happens when you don’t prime the pod correctly due to chain vaping or the viscosity of overly thick e-liquid. Once the coil burns, you cannot repair it.
Fixes: Prime new pods for 5-10 minutes before use, take breaks between puffs, and use 50/50 or 60/40 juice. Change the coil in case it is burnt.
Problems and Fixes of Vaporesso Gen Series, Armour, and iTank
1. Firmware and update problems
Unprofessionally made firmware updates may lead to such troubles as incomplete updates, device quirks..
Fixes: Use official Vaporesso software, make sure that the vape is charged to the maximum, and try using different USB ports. Avoid unnecessary updates unless they address specific issues.
2. Problems with performance and power delivery
Battery issues or incompatible coils may cause weak vapour or poor flavour. It is among the common Vaporesso Pods problems.
Fixes: Change the existing batteries, clean connections with isopropyl alcohol, and ensure coils match the recommended wattage. Additionally, the best settings would be with the Smart mode of Vaporesso.
3. AXON Chip Problems and screen malfunction
Error messages like “Check Battery” or “No Atomiser” are usually related to battery or coil issues.
Fixes: Verify the battery connection, make sure that the coil is in place and clean up the 510 connection. In the case of Short Circuit, use an alternative coil. A factory reset may also solve other settings problems.
4. Mod failing to power on or charge
In case of a non-responsive Gen or Armour mod, the reason can be battery problems, a damaged charging port, or a firmware glitch.
Fixes: For external battery mods, reinsert the batteries, clean the contacts, or reset the mod. For internal battery mods, try a different cable, adapter, and reset by holding all buttons for 10 seconds. Reinstall firmware if needed.
5. Issues with the coil and Tank leakage
Leaking tanks occur when you don’t refill properly, have issues with O-rings, or use mismatched proportions of PG/VG.
Fixes: Check if O-rings are in good condition, the coil is placed correctly, and the tank is mounted correctly. Take 70/30 VG juices and change coils after 2-3 weeks. Hence, for emergencies, clean and reassemble the tank.
Conclusion
With the help of the tips, one can deal with common Vaporesso Kit problems effectively. Everyday maintenance, such as cleaning connections and checking for leaks, can also prevent many problems. Yet, in case the problem does not change, do not keep on struggling, but seek help or find a substitute in case it is necessary. Proper treatment and observation will ensure that your Vaporesso pods offer you good vaping experiences over a considerable period.
